IEI Integration KINO-9652 v1.11 - Manual (Page 114)

KINO-9652 Mini-ITX SBC
Page 92
Figure 5-17: SATA Power Drive Connection
5.6.5 USB Cable (Dual Port) with Slot Bracket
The KINO-9653 can be shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the KINO-9652 USB connector.
Step 3: Insert the cable connectors . Once the cable connectors are properly aligned
with the USB connectors on the KINO-9652, connect the cable connectors to the