IEI Integration KINO-9652 v1.11 - Manual (Page 117)

KINO-9652 Mini-ITX SBC
Page 95
USB combo connector is shown in Chapter 3.
Step 2: Insert an RJ-45 plug. Insert the RJ-45 plug of a LAN into the RJ-45 receptacle
on the external peripheral interface. See Figure 5-20.
Step 3: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See Figure
5-20. Step 0:
Figure 5-20: RJ-45 Ethernet Connector
5.7.3 VGA Monitor Connection
The KINO-9652 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the KINO-9652, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen