H.2 sound effect configuration, H.2.1 accessing the sound effects manager, H.1 i – IEI Integration KINO-9652 v1.11 User Manual
Page 254: Ntroduction, H.1.1 accessing the ac’97 codec, H.1.2 driver installation, H.1 introduction
KINO-9652 Mini-ITX SBC
Page 232
H.1 Introduction
The motherboard comes with an onboard Realtek ALC883 CODEC. The ALC883 is a
16-bit, full-duplex AC'97 Rev. 2.3 compatible six-channel audio CODEC that provides
three pairs of stereo outputs with 5-bit volume control, a mono output, and multiple stereo
and mono inputs, along with flexible mixing, gain, and mute functions.
H.1.1 Accessing the AC’97 CODEC
The CODEC is accessed through the phone jacks on the rear panel of the motherboard.
The phone jacks include:
LINE IN
LINE OUT
MIC IN
H.1.2 Driver Installation
The driver installation has been described in Section 7.7.
After rebooting, the sound effect configuration utility appears in the Windows Control
Panel (Figure H-1). If the peripheral speakers are properly connected, sound effects
should be heard.