IEI Integration KINO-9652 v1.11 - Manual (Page 35)

KINO-9652 Mini-ITX SBC
Page 13
CAUTION:
The DIMM1 socket must be installed with one DDR2 DIMM to enable
the KINO-9652 to boot-up properly.
The Intel
®
GME965 GMCH on the KINO-9652 supports two 240-pin DDR2 DIMMs with the
following features:
Two 240-pin DIMMs
DDR2 only (DO NOT install a DDR DIMM)
Single-channel or dual-channel
Capacities of 256MB, 512MB or 1GB
Transfer speeds of 533 MHz or 667 MHz
64-bit wide channel
The memory sockets are shown in Figure 2-5.
Figure 2-5: 240-pin DDR2 DIMM Sockets