C.3 assembly language samples, C.3.1 enable the dio input function, C.3.2 enable the dio output function – IEI Integration KINO-9652 v1.11 User Manual
Page 238: C.1 dio i, Nterface, Ntroduction, C.2 dio c, Onnector, Inouts, C.1 dio interface introduction
KINO-9652 Mini-ITX SBC
Page 216
C.1 DIO Interface Introduction
The DIO connector on the KINO-9652 is interfaced to GPIO ports on the IT8712F Super
I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs
and digital outputs are generally control signals that control the on/off circuit of external
devices or TTL devices. Data can be read or written to the selected address to enable the
DIO functions.
NOTE:
For further information, please refer to the datasheet for the IT8712F
Super I/O chipset.
C.2 DIO Connector Pinouts
The following table describes how the DIO connector pins are connected to the Super I/O
GPIO port 1.
Pin Description Super
I/O
Pin
Super I/O Pin Description
1 Ground
N/A
N/A
2 VCC
N/A
N/A
3
Output 3
GP27
General purpose I/O port 2 bit 7.
4
Output 2
GP26
General purpose I/O port 2 bit 6.
5
Output 1
GP25
General purpose I/O port 2 bit 5.
6
Output 0
GP24
General purpose I/O port 2 bit 4.
7
Input 3
GP23
General purpose I/O port 2 bit 3.
8
Input 2
GP22
General purpose I/O port 2 bit 2
9
Input 1
GP21
General purpose I/O port 2 bit 1
10
Input 0
GP20
General purpose I/O port 2 bit 0