1 so-dimm installation, Figure 4-1: so-dimm installation, Figure4-2: so-dimm connector location – IEI Integration KINO-PVN-D4251_D5251 User Manual
Page 55
Advertising
KINO-PVN-D5251/D4251/ Mini ITX SBC
Page 41
4.4.1 SO-DIMM Installation
To install a SO-DIMM, please follow the steps below and refer to Figure 4-1.
Figure 4-1: SO-DIMM Installation
Step 1:
Locate the SO-DIMM socket on the board (See the figure below). Place the
board on an anti-static mat.
Figureٛ 4-2: SO-DIMM Connector Location
Step 2:
Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Step 3:
Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)
Step 4:
Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See
Step 0:
Advertising