IEI Integration KINO-PVN-D4251_D5251 - Manual (Page 69)

KINO-PVN-D5251/D4251/ Mini ITX SBC
Page 55
Step 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
KINO-PVN-D5251/D4251. See Figure 4-15.
Figure 4-15: VGA Connector
Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.9.6 DVI Display Device Connection
The KINO-PVN-D5251/D4251 has a single female DVI-I connector on the external
peripheral interface panel. The DVI-I connector is connected to a digital display device. To
connect a digital display device to the KINO-PVN-D5251/D4251, please follow the
instructions below.
Step 1: Locate the DVI-I connector. The location of the DVI-I connector is shown in
another chapter.