IEI Integration KINO-PVN-D4251_D5251 - Manual (Page 68)

KINO-PVN-D5251/D4251/ Mini ITX SBC
Page 54
Step 2: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
Figure 4-14. Step 0:
Figure 4-14: USB Connector
4.9.5 VGA Monitor Connection
The KINO-PVN-D5251/D4251 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the KINO-PVN-D5251/D4251, please follow the instructions
below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.