IEI Integration KINO-PVN-D4251_D5251 - Manual (Page 59)

KINO-PVN-D5251/D4251/ Mini ITX SBC
Page 45
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in
6
Table 4-3.
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default
Short 2 - 3 Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in
6
Figure 4-5 below.
Figure 4-5: Clear CMOS Jumper
4.6.3 CompactFlash® Card Setup Jumper
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-4
Jumper Location: See Figure 4-6
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Open Slave
Closed Master
Table 4-4: CompactFlash® Setup Jumper Settings