IEI Integration IMBA-Q454 v1.01 - Manual (Page 169)

IMBA-Q454-R10 User Manual
Page 169
Step 1: A screen prompts the user to press <Ctrl+P> after a single beep during boot-up
process. To get into the Intel® MEBx settings, press <Ctrl+P>.
Step 2: Enter the Intel® current ME password as required (
1049H947H
Figure 7-2). Enter the factory
default ME password: Abab12!@ (the Intel® default password is admin).
NOTE:
The default Intel® ME password is "admin". When the BIOS is cleared,
the password will reset to "admin".
Figure 7-2: Intel® Current ME Password
Step 3: To change the password, select Change Intel® ME Password. Enter a new
password following the strong password rule (containing at least one upper case
letter, one lower case letter, one digit and one special character, and be at least
eight characters). (
1050H948H
Figure 7-3)