IEI Integration IMBA-Q454 v1.01 - Manual (Page 87)

IMBA-Q454-R10 User Manual
Page 87
Figure 4-20: USB Connector
4.6.6 VGA Monitor
The IMBA-Q454-R10 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the IMBA-Q454-R10, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
IMBA-Q454-R10. See
8
Figure 4-21.