IEI Integration IMBA-Q454 v1.01 - Manual (Page 86)

IMBA-Q454-R10 User Manual
Page 86
Figure 4-19: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector .
Step 0:
4.6.5 USB
The external USB connectors provide easier and quicker access to external USB devices.
Follow the steps below to connect USB devices to the IMBA-Q454-R10.
Step 1: Locate the USB connectors. The location of the USB receptacle connectors
are shown in Chapter 3.
Step 2: Insert a USB plug. Insert the USB plug of a device into the USB receptacle on
the external peripheral interface. See
8
Figure 4-20. Step 0: