IEI Integration IMBA-G412ISA v2.00 - Manual (Page 105)

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 91
NOTE:
Identical baud rate setting must be set on the host (a management computer
running a terminal software) and the slave
 Re direc tion Afte r BIOS POST [Alwa ys ]
Use the Redirection After BIOS POST option to specify when console redirection should
occur.
 Disabled The console is not redirected after POST

Boot Loader Redirection is active during POST and during Boot
Loader
 Always D EFAULT Redirection is always active (Some OSes may not
work if set to Always)
 Te rmina l Typ e [ANSI]
Use the Terminal Type BIOS option to specify the remote terminal type.
 ANSI D EFAULT The target terminal type is ANSI
 VT100 The target terminal type is VT100
 VT-UTF8 The target terminal type is VT-UTF8
5.3.7 US B Co n fig u ra tio n
Use the USB Configuration menu (BIOS Menu 11) to read USB configuration
information and configure the USB settings.