IEI Integration IMBA-G412ISA v2.00 - Manual (Page 75)

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 61
Figure 4-19: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. S te p 0:
4.6.4 P a ra lle l De vic e Co n n e c tio n
The IMBA-G412ISA has a single female DB-25 connector on the external peripheral
interface panel for parallel devices. Follow the steps below to connect a parallel device to
the IMBA-G412ISA.
S te p 1: Locate the DB-25 connector. The location of the DB-25 connector is shown in
Chapter 3.
S te p 2: Insert the DB-25 connector. Insert the DB-25 connector of a parallel device
into the DB-25 connector on the external peripheral interface. See Figure 4-20.