IEI Integration IMBA-G412ISA v2.00 - Manual (Page 67)

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 53
4.4.4 Co m pa c tFla s h ® S e tu p
J u m p e r La b e l: J P 2
J u m p e r Typ e : 2-pin header
J u m p e r S e ttin g s : See Table 4-5
J u m p e r Lo c a tio n : See Figure 4-11
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Short Master (Default)
Open Slave
Table 4-5: CompactFlash® Setup Jumper Settings
Figure 4-11: CompactFlash® Setup Jumper Location
4.4.5 CF Vo lta g e S e le c t J u m p e r
J u m p e r La b e l: J _CF1
J u m p e r Typ e : 3-pin header
J u m p e r S e ttin g s : See Table 4-6
J u m p e r Lo c a tio n : See Figure 4-12
The CF voltage select jumper sets the voltage of the CompactFlash® slot.