IEI Integration IMBA-G412ISA v2.00 - Manual (Page 71)

2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 57
Figure 4-15: SATA Power Drive Connection
4.5.2 Du a l RS -232 Ca b le with S lo t Bra c ke t
The dual RS-232 cable slot connector consists of two connectors attached to two
independent cables. Each cable is then attached to a D-sub 9 male connector that is
mounted onto a slot. To install the dual RS-232 cable, please follow the steps below.
S te p 1: Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
S te p 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 4-16. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.