6 usb device connection, Figure 4-21: serial device connector – IEI Integration IMBA-G412ISA v2.00 User Manual
Page 77
2012/1/202012/1/20
IMBA-G412IS A ATX Mo th e rb o a rd
P a g e 63
Figure 4-21: Serial Device Connector
S te p 3:
Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
S te p 0:
4.6.6 US B De vic e Co n n e c tio n
The external USB Series "A" receptacle connectors provide easier and quicker access to
external USB devices. Follow the steps below to connect USB devices to the
IMBA-G412ISA.
S te p 1:
Locate the USB Series "A" receptacle connectors. The location of the USB
Series "A" receptacle connectors are shown in Chapter 3.
S te p 2:
Insert a USB Series "A" plug.
Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface.