IEI Integration IMBA-Q770 - Manual (Page 123)

IMBA-Q770 ATX Motherboard
Page 108
Î Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.
Î
Disabled D EFAULT Ignore all PXE Option ROMs
Î
Enabled Load PXE Option ROMs.
Î UEFI Boot [Disabled]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.
Î
Enabled Boot from UEFI devices is enabled.
Î
Disabled D EFAULT Boot from UEFI devices is disabled.
5.6 Security
Use the Security menu (BIOS Menu 27) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be:
Minimum length
3
Maximum length 20
Administrator Password
User Password
Set Administrator
Password
---------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 27: Security
Î Administrator Password
Use the Administrator Password to set or change a administrator password.