IEI Integration IMBA-Q770 - Manual (Page 83)

IMBA-Q770 ATX Motherboard
Page 68
Figure 4-21: USB Connection
4.6 Intel
®
AMT Setup Procedure
The IMBA-Q770 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1: Make sure the DIMM socket is installed with one DDR3 memory.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN2.
Step 3: The UEFI BIOS options regarding the Intel® ME or Intel® AMT must be enabled.
Step 4: Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory in the driver CD. See Section 6.9.
Step 5: Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up
process. Enter the Intel® current ME password as it requires (the Intel® default
password is admin).