IEI Integration IMBA-Q770 - Manual (Page 81)

IMBA-Q770 ATX Motherboard
Page 66
Figure 4-19: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.5.5 Serial Device Connection
The IMBA-Q770 has one male DB-9 connector on the external peripheral interface panel
for serial device connection. Follow the steps below to connect a serial device to the
IMBA-Q770.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 4-20.