IEI Integration IMBA-Q770 - Manual (Page 35)

IMBA-Q770 ATX Motherboard
Page 20
3.2.3 Battery Connectors
CAUTION:
Risk of explosion if battery is replaced by an incorrect type. Only
certified engineers should replace the on-board battery.
Dispose of used batteries according to instructions and local
regulations.
CN Label: BAT1, BT2
CN Type: Battery holder and 2-pin wafer
CN Location: See Figure 3-4
CN Pinouts: See Table 3-5
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
Figure 3-4: Battery Connector Locations