IEI Integration NANO-LX v1.00 - Manual (Page 126)

126 IEI ® Technology, Corp.
x EPP Mode Select [EPP1.7]
The EPP Mode Select option is only available if the Parallel Port Mode option is set to
EPP mode. Use the EPP Mode Select option to select the parallel port mode standard for
the parallel port.
EPP1.9 EPP 1.9 is selected as the EPP standard.
EPP1.7 (Default) EPP 1.7 is selected as the EPP standard.
x ECP Mode Use DMA [3]
The ECP Mode Use DMA option is only available if the Parallel Port Mode option is set to
ECP mode. Use the ECP Mode Use DMA option to specify the DMA channel the parallel
port must use in the ECP mode.
1 The parallel port uses DMA Channel 1 in ECP mode.
3 (Default) The parallel port uses DMA Channel 3 in ECP mode.
CIR Port Address [Disabled]
Use the CIR Port Address option to enable the CIR port and set the CIR port base
address.
Disabled (Default)
3F8
2F8
3E8
2E8