IEI Integration NANO-LX v1.00 User Manual
Page 207
NANO-LX CPU Card
207
WARNING!
The new power adapter cable for the NANO-LX has its “Ground” pin
removed from the 3-pin ATX feature connector. Connecting the power
feature connector cable will destroy the CPU board.
Be sure that the standard 4-pin AT power connector is connected to the CPU
card power connector (CN2).
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Connect the optional ATX power cable to the AT power cable using their 4P
power connectors (Figur
).
e F-2
Connect the optional ATX power cable to the CPU card ATX connector (CN3)
using the 3-pin ATX feature connector (F
Connect an ATX power button switch to CN5.
Connect the 20-pin ATX power connector to an ATX power supply (Figure F-2).
Figure F-2: ATX Power Adapter Cable
Press the power button switch once to turn on the system. To turn off the power
supply press the ATX power switch button for about 4 seconds.
Step 0: