IEI Integration NOVA-945GSE v2.01 - Manual (Page 68)

NOVA-945GSE 5.25” SBC
Page 66
Description Label Type
AT Power Mode Setting ATXCTL1 2-pin header
CF Card Setting J_CF1 2-pin header
Clear CMOS J_CMOS1 3-pin header
COM3 Function Select JP1 6-pin header
LVDS1 Panel Resolution J_LCD_TYPE1 8-pin header
LVDS2 Panel Resolution JP4 8-pin header
LVDS1 Voltage Select J_VLVDS1 3-pin header
LVDS2 Voltage Select J_VLVDS2 3-pin header
Table 4-1: Jumpers
4.5.1 AT Power Select Jumper Settings
Jumper Label: ATXCTL1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4-4
The AT Power Select jumper specifies the systems power mode as AT or ATX. AT Power
Select jumper settings are shown in Table 4-2.
AT Power Select Description
Open Use ATX power Default
Short Use AT power
Table 4-2: AT Power Select Jumper Settings
The location of the AT Power Select jumper is shown in Figure 4-4 below.