IEI Integration NOVA-945GSE v2.01 - Manual (Page 81)

NOVA-945GSE 5.25” SBC
Page 79
Figure 4-14: SATA Power Drive Connection
4.7.5 USB Cable (Dual Port without Bracket)
The NOVA-945GSE is shipped with a dual port USB 2.0 cable. To connect the USB cable
connector, please follow the steps below.
Step 1: Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
WARNING:
If the USB pins are not properly aligned, the USB device can burn out.
Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on
each cable connector with pin 1 on the NOVA-945GSE USB connector.
Step 3: Insert the cable connectors. Once the cable connectors are properly aligned