IEI Integration NOVA-945GSE v2.01 - Manual (Page 74)

NOVA-945GSE 5.25” SBC
Page 72
4.5.6 LVDS Voltage Selection Jumpers
WARNING:
Permanent damage to the screen and NOVA-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1 and J_VLVDS2
Jumper Type: 3-pin header
Jumper Settings: See Table 4-8
Jumper Location: See Figure 4-9
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1 and J_VLVDS2 sets the voltage for the
screen connected to LVDS2. The LVDS Voltage Selection jumper settings are shown in
Table 4-8.
LCD Voltage Select Description
Short 1-2 +3.3V LVDS Default
Short 2-3 +5V LVDS
Table 4-8: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 4-9.