IEI Integration NOVA-945GSE v2.01 - Manual (Page 69)

NOVA-945GSE 5.25” SBC
Page 67
Figure 4-4: AT Power Select Jumper Location
4.5.2 CF Card Setup
Jumper Label: J_CF1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-3
Jumper Location: See Figure 4-5
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 4-3.
CF Card Setup Description
Open Slave Default
Closed Master
Table 4-3: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 4-5.