IEI Integration NOVA-945GSE v2.01 - Manual (Page 72)

NOVA-945GSE 5.25” SBC
Page 70
COM 3 Function Select Description
Short 1-2 RS-232 Default
Short 3-4 RS-422
Short 5-6 RS-485
Table 4-5: COM 3 Function Select Jumper Settings
The COM 3 Function Select jumper location is shown in Figure 4-7.
Figure 4-7: COM 3 Function Select Jumper Location
4.5.5 LVDS Panel Resolution Jumpers
Jumper Label: J_LCD_TYPE1 and JP4
Jumper Type: 8-pin header
Jumper Settings: See Table 4-6
Jumper Location: See Figure 4-8
The LVDS Panel Resolution jumpers allow the resolution of the LVDS screens connected
to the LVDS connectors to be configured. The J_LCD_TYPE1 sets the LVDS1 connector
while JP4 sets the LVDS2 connector. The LVDS Panel Resolution jumper settings are
shown in Table 4-6.