IEI Integration PM-945GSE - Manual (Page 39)

PM-945GSE-N270 User Manual
Page 39
The PM-945GSE-N270 is equipped with an Ethernet controller. The Ethernet controller is
interfaced to the external LAN by direct connection to the LAN connection or by
connecting the LAN connector to an RJ-45 interface connector.
Figure 3-11: LAN Connector Location
PIN DESCRIPTION PIN DESCRIPTION
1 VCC3.3 6 Active
2 RX+ 7 RX-
3 Link 8 GND
4 N/C 9 GND
5 TX+ 10 TX-
Table 3-10: LAN Connector Pinouts
3.2.10 LCD Inverter Connector
CN Label: INVERTER1
CN Type: 5-pin wafer connector
CN Location: See Figure 3-12
CN Pinouts: See Table 3-11
The Inverter connector connects to the LCD backlight.