5 usb cable (dual port without bracket), Figure 4-12: four serial port connector, Figure 4-13: serial device connector – IEI Integration PM-945GSE User Manual
Page 69
Advertising
PM-945GSE-N270 User Manual
Page 69
Figure 4-12: Four Serial Port Connector
Step 3:
Secure the serial ports to the chassis. Tighten the screws on the DB-9
connectors to secure them to the chassis.
Step 0:
Figure 4-13: Serial Device Connector
4.7.5 USB Cable (Dual Port without Bracket)
The PM-945GSE-N270 is shipped with a dual port USB 2.0 cable. To connect the USB
cable connector, please follow the steps below.
Step 1:
Locate the connectors. The locations of the USB connectors are shown in
Chapter 3.
Advertising