IEI Integration PM-945GSE - Manual (Page 62)

PM-945GSE-N270 User Manual
Page 62
4.6 Chassis Installation
WARNING:
Airflow is critical to the cooling of the CPU and other onboard components. The
chassis in which the PM-945GSE-N270 must have air vents to allow cool air to
move into the system and hot air to move out.
The PM-945GSE-N270 must be installed in a chassis with ventilation holes on the sides
allowing air to flow through the heat sink surface. In a system with an individual power
supply unit, the power supply cooling fan can help generate airflow through the board
surface.
NOTE:
IEI has a wide range of backplanes available. Please contact your vendor,
reseller or an IEI sales representative at [email protected] or visit the IEI website
(http://www.ieiworld.com.tw) to find out more about the available chassis.
4.7 Internal Peripheral Device Connections
The cables listed in Table 4-5 are shipped with the PM-945GSE-N270.
Quantity Type
1 Quad RS-232 cable w/o bracket
1 KB/MS PS/2 Y-cable
1 Dual USB cable w/o bracket
1 LAN cable
1 Power cable
1 SATA cable
1 VGA cable
Table 4-5: IEI Provided Cables