IEI Integration PM-945GSE - Manual (Page 95)

PM-945GSE-N270 User Manual
Page 95

Auto Legacy USB support disabled if no USB devices are
connected
5.4 PCI/PnP
Use the PCI/PnP menu (BIOS Menu 11) to configure advanced PCI and PnP settings.
WARNING!
Setting wrong values for the BIOS selections in the PCIPnP BIOS
menu may cause the system to malfunction.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Advanced PCI/PnP Settings

WARNING: Setting wrong values in below sections
may cause system to malfunction
IRQ3
[Reserved]
IRQ4 [Reserved]
IRQ5 [Available]
IRQ7 [Reserved]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ14 [Available]
IRQ15 [Available]
DMA Channel 0
[Available]
DMA Channel 1 [Available]
DMA Channel 3 [Available]
DMA Channel 5 [Available]
DMA Channel 6 [Available]
DMA Channel 7 [Available]
Available: Specified IRQ
is available to be use
the PCI/PnP devices
Reserved: Specified IRQ
is reserved for use by
legacy ISA devices
 Select
Screen
  Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 11: PCI/PnP Configuration
 IRQ# [Available]
Use the IRQ# address to specify what IRQs can be assigned to a particular peripheral
device.