IEI Integration WAFER-945GSELVDS2 - Manual (Page 29)

WAFER-945GSELVDS2
Page 17
CN Pinouts: See Table 3-5
The 10-pin audio connector is connected to external audio devices including speakers and
microphones for the input and output of audio signals to and from the system.
Figure 3-4: Audio Connector Pinouts
Pin Description Pin Description
1 Line out R 2 Line in R
3 GND 4 GND
5 Line out L 6 Line in L
7 GND 8 GND
9 MIC in 10 Mic in
Table 3-5: Audio Connector Pinouts
3.3.4 Battery Connector
NOTE:
Attach the battery to the board or enclosure before use. Only the
battery cable is connected before shipping, but battery must also be
attached to a surface.