IEI Integration WAFER-945GSELVDS2 - Manual (Page 66)

WAFER-945GSELVDS2
Page 54
The LVDS1 Voltage Selection jumper location. is shown in Figure 4-9.
Figure 4-9: LVDS1 Voltage Selection Jumper Pinout Locations
4.6.8 LVDS2 Voltage Selection
WARNING:
Permanent damage to the screen and WAFER-945GSELVDS2 may
occur if the wrong voltage is selected with this jumper. Please refer to
the user guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS2
Jumper Type: 3-pin header
Jumper Settings: See Table 4-10
Jumper Location: See Figure 4-10
Sets the voltage provided to the monitor connected to LVDS2
Pin Description
1-2 +3.3V LVDS
2-3 +5V LVDS
Table 4-10: LVDS2 Voltage Selection Jumper Settings
The LVDS2 Voltage Selection jumper location. is shown in Figure 4-9.