Figure 4-15: keyboard/mouse y-cable connection – IEI Integration WAFER-945GSELVDS2 User Manual
Page 73
WAFER-945GSELVDS2
Page 61
Step 3:
Insert the cable connectors
.
Once the cable connector is properly aligned with
the keyboard/mouse connector on the WAFER-945GSELVDS2, connect the
cable connector to the on-board connectors. See Figure 4-15.
Figure 4-15: Keyboard/mouse Y-cable Connection
Step 4:
Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable
connector is connected to two PS/2 connectors. To secure the PS/2 connectors
to the chassis please refer to the installation instructions that came with the
chassis.
Step 5:
Connect the keyboard and mouse. Once the PS/2 connectors are connected
to the chassis, a keyboard and mouse can each be connected to one of the
PS/2 connectors. The keyboard PS/2 connector and mouse PS/2 connector are
both marked. Please make sure the keyboard and mouse are connected to the
correct PS/2 connector.
Step 0: