IEI Integration WAFER-945GSELVDS2 - Manual (Page 48)

WAFER-945GSELVDS2
Page 36
The 2x4 USB pin connectors each provide connectivity to two USB 1.1 or two USB 2.0
ports. Each USB connector can support two USB devices. Additional external USB ports
are found on the rear panel. The USB ports are used for I/O bus expansion.
Figure 3-21: USB Connector Pinout Locations
Pin Description Pin Description
1 VCC 2 GND
3 DATA- 4 DATA+
5 DATA+ 6 DATA-
7 GND 8 VCC
Table 3-22: USB Port Connector Pinouts
3.4 External Peripheral Interface Connector Panel
Figure 3-22: WAFER-945GSELVDS2 External Peripheral Interface Connector