4 vga monitor connection, Figure 4-19: usb connector – IEI Integration WAFER-945GSELVDS2 User Manual
Page 77
WAFER-945GSELVDS2
Page 65
Step 1:
Locate the USB Series "A" receptacle connectors. The location of the USB
Series "A" receptacle connectors are shown in Chapter 3.
Step 2:
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See Figure
Step 0:
Figure 4-19: USB Connector
4.9.4 VGA Monitor Connection
The WAFER-945GSELVDS2 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the WAFER-945GSELVDS2, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.