IEI Integration WAFER-CV-D25502_N26002 - Manual (Page 58)

WAFER-CV-D25502/N26002 3.5" Motherboard
Page 43
Setting Description
Short 1-2 Use ATX power (Default)
Off Use AT power
Table 4-2: AT/ATX Power Selection Jumper Settings
Figure 4-1: AT/ATX Power Selection Jumper Location
4.3.2 Clear CMOS Jumper
Jumper Label: JP3
Jumper Type: 3-pin header
Jumper Settings: See
7
Table 4-3
Jumper Location: See
7
Figure 4-2
To reset the BIOS, move the jumper to the "Clear CMOS Setup" position for 3 seconds or
more, and then move back to the default position.
Setting Description
Short 1-2 Keep CMOS Setup (Default)
Short 2-3 Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings