IEI Integration uIBX-200-VX800 v2.00 - Manual (Page 109)

uIBX-200-R20/VX800 Embedded System
Page 99
B.1.2 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
uIBX-200-R20/VX800 may result in permanent damage to the
uIBX-200-R20/VX800 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the uIBX-200-R20/VX800. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the uIBX-200-R20/VX800 is opened and any of the
electrical components are handled, the following anti-static precautions are strictly
adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.
ƒ Self-grounding: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.
ƒ Use an anti-static pad: When configuring or working with an electrical
component, place it on an antic-static pad. This reduces the possibility of ESD
damage.
ƒ Only handle the edges of the electrical component: When handling the
electrical component, hold the electrical component by its edges.
B.2 Maintenance and Cleaning Precautions
When maintaining or cleaning the uIBX-200-R20/VX800, please follow the guidelines
below.
B.2.1 Maintenance and Cleaning
Prior to cleaning any part or component of the uIBX-200-R20/VX800, please read the
details below.