IEI Integration uIBX-200-VX800 v2.00 - Manual (Page 55)

uIBX-200-R20/VX800 Embedded System
Page 45
5.3.3 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8]
Serial Port1 IRQ [4]
Serial Port2 Address [2F8]
Serial Port2 IRQ [3]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
ƒ Serial Port1 Address [3F8]
Sets the port address of serial port 1.
ƒ Disabled
ƒ 3F8 D EFAULT
ƒ 2F8
ƒ 3E8
ƒ 2E8
ƒ Serial Port1 IRQ [4]
Sets the interrupt request for serial port 1.
ƒ 3
ƒ 4 D EFAULT