Figure a-2: launching the recovery tool, Figure a-3: recovery tool setup menu – IEI Integration uIBX-200-VX800 v2.00 User Manual
Page 84
Advertising
uIBX-200-R20/VX800 Embedded System
Page 74
Step 1:
Put the recovery CD in the optical drive of the system.
Step 2:
Boot the system from recovery CD
. When prompted, press any key to boot
from the recovery CD. It will take a while to launch the recovery tool. Please be
patient!
Figure A-2: Launching the Recovery Tool
Step 3:
The recovery tool setup menu is shown as below.
Figure A-3: Recovery Tool Setup Menu
Step 4:
Press <5> then <Enter>.
Advertising