5 mounting the system, 1 mounting option 1, Ounting the – IEI Integration uIBX-200-VX800 v2.00 User Manual
Page 38: Ystem, Figure 4–16: 100 mm to 75 mm adapter, Table 4-9: vga connector pinouts
Advertising
uIBX-200-R20/VX800 Embedded System
Page 28
Pin Description Pin
Description
7 GND
8
GND
9
VCC / NC
10
GND
11 NC
12
DDC
DAT
13 HSYNC
14
VSYNC
15 DDCCLK
Table 4-9: VGA Connector Pinouts
4.5 Mounting the System
To install the uIBX-200-R20/VX800 on the VESA mounting slot, between the monitor
stand and the monitor, follow the instructions below.
4.5.1 Mounting Option 1
Step 1:
If the mounting pattern on the panel PC is VESA 100 mm then the adapter must
be attached.
Figure 4–16: 100 mm to 75 mm Adapter
Advertising