A.2.5 create factory default image, Figure a-10: press f3 to boot into recovery mode, Figure a-11: recovery tool menu – IEI Integration TANK-720-Q67 User Manual
Page 110
TANK-720 Em b e d d e d S ys te m
P a g e 98
A.2.5 Cre a te Fa c to ry De fa u lt Im a g e
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
S te p 1:
Turn on the system. When the following screen displays (Figure A-10), press
the <F3> key to access the recovery tool. The message will display for 10
seconds, please press F3 before the system boots into the operating system.
Figure A-10: Press F3 to Boot into Recovery Mode
S te p 2:
The recovery tool menu appears. Type <4> and press <Enter>. (Figure A-11)
Figure A-11: Recovery Tool Menu
S te p 3:
The About Symantec Ghost window appears. Click OK button to continue.