IEI Integration TANK-720-Q67 - Manual (Page 23)

TANK-720 Em b e d d e d S ys te m
P a g e 11
2.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the TANK-720 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the TANK-720. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the TANK-720 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Touch any grounded conducting material before handling
the board. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the TANK-720, place it on an
antic-static pad. This reduces the possibility of ESD damaging the TANK-720.
2.2 Un pa c kin g P re c a u tio n s
When the TANK-720 is unpacked, please do the following:
 Follow the anti-static precautions outlined in Section 2.1.
 Make sure the packing box is facing upwards so the TANK-720 does not fall
out of the box.
 Make sure all the components shown in Section 2.3 are present.