IEI Integration TANK-720-Q67 - Manual (Page 52)

TANK-720 Em b e d d e d S ys te m
P a g e 40
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Figure 1-3.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with,
insert the male connector from the VGA screen cable into the female connector
on the TANK-720. See Figure 3-32.
Figure 3-32: VGA Connector
S te p 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Figure 3-33: VGA Connector