IEI Integration TANK-720-Q67 - Manual (Page 93)

TANK-720 Em b e d d e d S ys te m
P a g e 81
 Bootup NumLoc k Sta te [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On D EFAULT Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.
 Ga te A20 Ac tive [Upon Reque s t]
Use the GateA20 Active option to set the GateA20 active mode.

Upon
Request
D EFAULT GateA20 can be disabled using BIOS services.

Always Do not allow disabling GateA20.
 Option ROM Me s s a ge s [Forc e BIOS]
Use the Option ROM Messages option to set the Option ROM display mode.

Force
BIOS
D EFAULT Sets display mode to force BIOS.

Keep
Current
Sets display mode to current.