IEI Integration ECN-780-Q67 - Manual (Page 36)

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 23
Figure 3-12: DVI Connector
S te p 4: Secure the connector. Secure the DVI connector from the digital display device
to the external interface by tightening the two retention screws on either side of
the connector.
3.8.3 HDMI De vic e Co n n e c tio n
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the ECN-780-Q67, follow the
steps below.
S te p 1: Locate the HDMI connector. The location is shown in Chapter 1.
S te p 2: Align the connector. Align the HDMI connector with the HDMI port. Make sure
the orientation of the connector is correct.