IEI Integration ECN-780-Q67 - Manual (Page 41)

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 28
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
ECN-780-Q67. See Figure 3-17.
Figure 3-17: VGA Connector
S te p 4: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
3.9 In te l
®
AMT S e tu p P ro c e d u re
The ECN-780-Q67 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
S te p 1: Make sure the memory socket is installed with one DDR3 DIMM.
S te p 2: Connect an Ethernet cable to one of the RJ-45 connector LANs which supports
AMT.
S te p 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,