IEI Integration ECN-780-Q67 - Manual (Page 40)

ECN-780-Q67 Em b e d d e d S ys te m
P a g e 27
S te p 2: Align the connectors. Align the USB device connector with one of the
connectors on the external peripheral interface. See Figure 3-16.
Figure 3-16: USB Device Connection
S te p 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. S te p 0:
3.8.7 VGA Mo n ito r Co n n e c tio n
The ECN-780-Q67 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the ECN-780-Q67, please follow the instructions below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.