IEI Integration UPC-12A_GM45 v2.10 - Manual (Page 106)

UPC-12A/GM45 Panel PC
Page 94
Î Memory Hole [Disabled]
Use the Memory Hole option to reserve memory space between 15 MB and 16 MB for
ISA expansion cards that require a specified area of memory to work properly. If an older
ISA expansion card is used, please refer to the documentation that came with the card to
see if it is necessary to reserve the space.
Î
Disabled D EFAULT
Memory is not reserved for ISA expansion cards
Î
15 MB –
16 MB
Between 15 MB and 16 MB of memory is reserved
for ISA expansion cards
Î Boots Graphics Adapter Priority [IGD]
Use the Boots Graphics Adapter Priority option to select the graphics controller used as
the primary boot device. Select either an integrated graphics controller (IGD) or a
combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
Configuration options are listed below:
ƒ IGD D EFAULT
ƒ PCI/IGD
Î Internal Graphics Mode Select [Enabled, 32MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Î
Disabled
Î
Enabled, 32MB D EFAULT
32 MB of memory used by internal graphics device
Î
Enabled, 64MB 64 MB of memory used by internal graphics device
Î
Enabled, 128MB
128 MB of memory used by internal graphics
device